Included in this Free-Standing Pergola Kit with 2×6 Angled Roof Slats + 1 Privacy Wall:

– 6x base brackets (for 6×6″ wood)
– 4x 3-arm post brackets (for 6×6″ wood)
– 2x 4-arm post brackets (for 6×6″ wood)
– 92x 2×6 insert brackets (for 2×6″ wood)
– 1.5″ pan (round) #12 self-tapping stainless steel wood screws (with accompanying hinged, black screw caps) for securing wood into brackets
– Complimentary 1-inch and 6-inch drill bits
– Note: Wood (lumber) and specialty hardware for anchoring the base brackets to a secure base are not included

This pergola kit will accommodate any stand-alone pergola ranging from 13-24 feet by 4-12 feet. The pergola does not need to be the exact dimensions shown in the images on this page.
The kit includes a total of 92 2×6 insert brackets. While the intent is that 64 of these brackets be used to add 16 angled roof slats to each of the pergola’s 2 roof sections (12′ span each with close spacing) and the remaining 28 be used for one privacy wall with 14 angled slats (8′ height with close spacing), you can use the brackets any way you’d like (i.e. adding a(nother) privacy wall or half/partial wall, adding a side railing, increasing the number of slats in a roof/wall section, etc.).

About Our Steel Brackets:

– 14-gauge steel (approximately 2mm thick)
– Laser-cut, bent and welded
– Advanced weather coating technology to withstand extreme weather conditions
– Pre-drilled holes for securing wood and accessories to brackets
– Includes 1.5″ pan (round) #12 self-tapping stainless steel wood screws (with accompanying hinged black screw caps) for securing wood into brackets